LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Colorado 4D Pickup, 2.9 9 >> Repair and Diagnosis >> Brakes >> Antilock Brake System With Traction Control System & Stability Control System >> Repair Instructions >> Electronic Brake Control Module Replacement >> Removal Procedure

Removal Procedure

WARNING: Refer to Brake Fluid Irritant Warning .
CAUTION: Refer to Brake Fluid Effects on Paint and Electrical Components Caution .
  1. Turn the ignition switch to the OFF position.
  2. Remove the brake pressure modulator valve (BPMV). Refer to Brake Pressure Modulator Valve Replacement .
    3. Fig 1: EBCM Bolts
    GM2136329Courtesy of GENERAL MOTORS CORP.
  3. Remove the electronic brake control module (EBCM) bolts (1).

    Discard the bolts.

    4. Fig 2: Separating EBCM
    GM2136331Courtesy of GENERAL MOTORS CORP.
  4. Carefully separate the EBCM (1) from the BPMV.
  5. Remove the 12 EBCM to BPMV seals (2).
scientia non olet · About LEMON Manuals