Installation Procedure

WARNING: This page is about a different car, the 2010 Saturn Sky and 2010 Pontiac Solstice. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying ECT Sensor

Courtesy of GENERAL MOTORS CORP.

CAUTION: Refer to Fastener Caution .

Install the ECT.
Tighten: Tighten the sensor to 20 N.m (15 lb ft).

Fig 2: View Of CMP Sensor & ECT Sensor Electrical Connectors

Courtesy of GENERAL MOTORS CORP.

Connect the engine wiring harness electrical connector (6) to the ECT sensor.
Fill the cooling system as needed. Refer to Cooling System Draining and Filling (GE-47716) or Cooling System Draining and Filling (2.4L LE5) or Cooling System Draining and Filling (Static Fill-LNF) .