LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Cobalt SS >> Repair and Diagnosis >> External Pages >> Different car >> Section 109 (Battery, Charging System And Starting System) >> Repair Instructions >> Battery Negative Cable Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2010 Saturn Sky and 2010 Pontiac Solstice. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Underhood Bussed Electrical Center (BEC) Bracket & Bolts
    GM1765457Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
  2. Remove the underhood bussed electrical center (BEC) bracket bolts and reposition the bracket and electrical center out of the way.
    3. Fig 2: Identifying Battery Connections
    GM1593197Courtesy of GENERAL MOTORS CORP.
  3. Remove the negative battery cable ground nut (4) at the side rail stud.
  4. Remove the negative battery cable terminal (3) from the stud.
    5. Fig 3: View Of Battery Cable Ground Terminal, Engine Harness Ground Terminal & Bolt
    GM1591855Courtesy of GENERAL MOTORS CORP.
  5. Remove the negative battery cable ground terminal bolt.
  6. Remove the negative battery cable ground terminal and engine harness ground terminal from the cylinder head.
    7. Fig 4: Identifying Positive Battery Cables & Cable Components
    GM1593202Courtesy of GENERAL MOTORS CORP.
  7. Remove the negative battery cable ground nut (1) at the bussed electrical center (BEC) stud.
  8. Remove the negative battery cable terminal from the BEC stud.
  9. Remove the negative battery cable clips (4) from the wheelhouse liner.
  10. Remove the battery cable clip bolt (3).
  11. Remove the negative battery cable out through the engine wiring harness junction block bracket.
scientia non olet · About LEMON Manuals