LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Cobalt SS >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 2.0L - Repair Instructions >> Repair Instructions >> Charge Air Cooler Inlet Pipe Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Charge Air Cooler Inlet Pipe Clamp
    GM2016295Courtesy of GENERAL MOTORS CORP.
    NOTE: Remove any oil film from inside the pipes.
  1. Install the charge air cooler pipe (2) and tighten the charge air cooler inlet pipe clamp.
    2. Fig 2: View Of Charge Air Cooler Inlet Pipe
    GM2001806Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Fastener Caution .
  2. Install the charge air cooler inlet pipe (2) to the charge air cooler (3) and tighten the clamp to 5 N.m (44 lb in).
scientia non olet · About LEMON Manuals