LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Cobalt Base, 4D Sedan, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 2.2L - Repair Instructions >> Repair Instructions >> Ignition Coil Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Camshaft Position Actuator Solenoid Valve Electrical Connectors
    GM1647538Courtesy of GENERAL MOTORS CORP.
  1. Ensure that the ignition key is in the OFF position.
  2. Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement .
  3. Disconnect the ignition coil electrical connector(s) (1).
    4. Fig 2: View Of Ignition Coils
    GM1578474Courtesy of GENERAL MOTORS CORP.
  4. Remove the ignition coil bolt(s).
  5. Remove the ignition coil(s).
scientia non olet · About LEMON Manuals