LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Chevy Express G2500, Van Cargo Extended, 6.6 6 >> Repair and Diagnosis >> Steering >> Steering Wheel & Steering Column >> Repair Instructions >> Turn Signal Multifunction Switch Replacement >> Installation Procedure

Installation Procedure

Fig 1: Identifying Turn Signal And Multifunction Switch Assembly
GM2215420Courtesy of GENERAL MOTORS CORP.
  1. Install the turn signal and multifunction switch assembly (2) to the steering column tilt head assembly.
    CAUTION: Refer to Fastener Caution .
  2. Install the 2 screws (1) to the turn signal and multifunction assembly and tighten to 3 N.m (27 lb in).
  3. Connect the turn signal and multifunction switch assembly connector.
  4. Install the upper and lower trim covers. Refer to Steering Column Trim Cover Replacement .
  5. Install the steering wheel. Refer to Steering Wheel Replacement .
  6. Enable the SIR system. Refer to SIR Disabling and Enabling .
scientia non olet · About LEMON Manuals