LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Chevy Express G2500, Van Cargo Extended, 6.6 6 >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 6.6L (LMM) - Repair Instructions >> Repair Instructions >> Fuel Strainer Bowl Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Diesel Fuel Conditioning Module Lower Assembly
    GM1665456Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: The water-in-fuel sensor must ONLY be tightened by hand.
  1. Install the diesel strainer bowl assembly.
  2. Connect the electrical connector.
  3. Prime the fuel system. Refer to Fuel System Priming .
  4. Start the engine. If the engine stalls, repeat the above step.
  5. Once the engine starts, inspect for fuel leaks.
scientia non olet · About LEMON Manuals