LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2009 >> Uplander Base, 3.9 1 >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Repair Instructions >> Rear Toe Adjustment

Rear Toe Adjustment

    NOTE: Make any adjustments to camber before setting toe.
    Fig 1: Locating Rear Suspension Components For Toe Adjustment
    GM819459Courtesy of GENERAL MOTORS CORP.
  1. Loosen the jam nut (6) at the rear wheel tie rod.
  2. Adjust the toe to the proper setting by turning the inner link adjustment hex (4). Refer to Wheel Alignment Specifications .
    3. CAUTION: Refer to Fastener Caution .
  3. When the toe adjustment is correct, tighten the jam nut to 62 N.m (45 lb ft)  .
  4. Recheck the toe alignment.
scientia non olet · About LEMON Manuals