LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2009 >> Uplander Base, 3.9 1 >> Repair and Diagnosis >> Electrical >> Horns >> Repair Instructions >> Horn Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Horn & Mounting Bolt
    GM1480005Courtesy of GENERAL MOTORS CORP.
  1. Position the horn (2) to the front impact bar.
    2. CAUTION: Refer to Fastener Caution .
  2. Install the horn bracket bolt (1) and tighten to 15 N.m (11 lb ft)  .
  3. Connect the horn electrical connector.
  4. Install the headlamps. Refer to Headlamp Assembly or Headlamp Bulb and/or Cornering, Sidemarker, Park, Turn Signal Bulb Replacement .
scientia non olet · About LEMON Manuals