Headlamp Replacement (OUTLOOK)
WARNING: This page is about a different car, the 2010 Saturn Outlook, 2010 GMC Acadia, 2010 Chevrolet Traverse, and 2010 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement (OUTLOOK) . |
|
| 1 | Headlamp Assembly Bolt (Qty: 3)
CAUTION:
Refer to Fastener Caution
. Tip: Tighten the fasteners in sequence as shown. Tighten: 6 N.m (53 lb in) |
| 2 | Headlamp Assembly Nut Tighten: 6 N.m (53 lb in) |
| 3 | Headlamp Assembly Procedure: Pull outward on the housing in order to disconnect the electrical connection at the lower rear edge of the lamp. |
| 4 | Electrical Harness Connector Procedure: Disconnect the electrical connector from the headlamp assembly. |