Heated Seat Control Module - Driver X2 (KA1 without A45 or SPO Accessory)

WARNING: This page is about a different car, the 2011 GMC Acadia, 2011 Chevrolet Traverse, and 2011 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Connector End View Heated Seat Control Module - Driver X2 (KA1 Without A45 Or SPO Accessory)

Courtesy of GENERAL MOTORS CORP.

Pin	Wire	Circuit	Function
1	2 RD/WH	640	Battery Positive Voltage
2	2 BK	550	Ground
3-4	-	-	Not Used
5	0.35 PK	2426	Low Reference
6	0.35 YE	2080	Low Reference
7	0.35 TN	2482	Low Reference
8	0.35 L-BU	5476	Low Reference

Connector Part Information

Harness Type: Driver Seat
OEM Connector: 6098-4713
Service Connector: 88988652
Description: 8-Way F 2.8 Series (BK)

Terminal Part Information

Pins: 1, 2
Terminated Lead: 13575578
Release Tool: J-38125-553
Diagnostic Test Probe: J-35616-35 (VT)
Terminal/Tray: 8100-4445/22
Core/Insulation Crimp: 4/4

Pins: 5-8
Terminated Lead: 13575577
Release Tool: J-38125-553
Diagnostic Test Probe: J-35616-35 (VT)
Terminal/Tray: 8100-4443/22
Core/Insulation Crimp: E/A