Automatic Transmission Shift Lock Control Actuator Replacement (Pull-to-Release Style Solenoid)

WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Automatic Transmission Shift Lock Control Actuator (Traverse)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the transmission control. Refer to Transmission Control Replacement (With Base)Transmission Control Replacement (Without Base) .
1	Shift Lock Actuator Procedure Disconnect the electrical connector from the shift lock actuator. Press lock on the solenoid wiring connector and remove by pulling on the connector, not the wire. Depress the shift lock actuator retaining tabs and press the solenoid into the base by pushing on the solenoid housing, NOT the white plunger. Connect the electrical connector from the shift lock actuator, ensuring the connector is fully locked into the solenoid. TIP: Ensure the solenoid is fully locked into the base.

Callout

Component Name

Preliminary Procedure
Remove the transmission control. Refer to Transmission Control Replacement (With Base)Transmission Control Replacement (Without Base) .

Shift Lock Actuator

Procedure

Disconnect the electrical connector from the shift lock actuator. Press lock on the solenoid wiring connector and remove by pulling on the connector, not the wire.
Depress the shift lock actuator retaining tabs and press the solenoid into the base by pushing on the solenoid housing, NOT the white plunger.
Connect the electrical connector from the shift lock actuator, ensuring the connector is fully locked into the solenoid.

TIP: Ensure the solenoid is fully locked into the base.