LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2009 >> Traverse LS, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (Engine Cooling System) >> Repair Instructions >> Water Pump Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2010 Saturn Outlook, 2010 GMC Acadia, 2010 Chevrolet Traverse, and 2010 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Water Pump Components
    GM1412162Courtesy of GENERAL MOTORS CORP.
  1. Install a NEW water pump seal.
  2. Install the water pump.
    3. CAUTION: Refer to Fastener Caution .
  3. Install the water pump bolts and tighten to 10 N.m (89 lb in).
    4. Fig 2: Locating Water Pump Pulley & Bolts
    GM1412160Courtesy of GENERAL MOTORS CORP.
  4. Install the water pump pulley and the water pump pulley bolts.
    5. Fig 3: View Of EN 46104 Installed On Water Pump Pulley
    GM1412158Courtesy of GENERAL MOTORS CORP.
  5. Use the EN 46104:  tool in order to retain the water pump pulley.
  6. Install the water pump pulley bolts and tighten to 10 N.m (89 lb in).
  7. Install the right engine strut mount. Refer to ENGINE MOUNT STRUT REPLACEMENT - RIGHT SIDE .
  8. Install the right engine mount strut bracket. Refer to ENGINE MOUNT STRUT BRACKET REPLACEMENT - RIGHT SIDE .
  9. Install the drive belt. Refer to DRIVE BELT REPLACEMENT .
  10. Fill the cooling system. Refer to Cooling System Draining and Filling (Static Fill)  or Cooling System Draining and Filling (Vac N Fill) .
scientia non olet · About LEMON Manuals