Body Control Module (BCM) X6

WARNING: This page is about a different car, the 2011 GMC Acadia, 2011 Chevrolet Traverse, and 2011 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Connector End View Body Control Module (BCM) X6

Courtesy of GENERAL MOTORS CORP.

Pin	Wire	Circuit	Function
1	-	-	Not Used
2	0.8 L-GN	24	Backup Lamp Voltage
3	0.8 GY	8	Instrument Panel Lamp Voltage
4-7	-	-	Not Used
8	0.35 TN/WH	746	Right Front Door Ajar Switch Signal (without AXE)
9	0.35 D-BU	245	Passenger Door Lock Switch Unlock (without AXE)
10	0.35 GY/BK	745	Left Front Door Ajar Switch Signal (without AXE)
11	-	-	Not Used
12	0.35 PK/BK	1303	Liftgate Ajar Switch Signal (TB4)
13	-	-	Not Used
14	0.35 L-GN/BK	748	Right Rear Door Ajar Switch Signal
15	0.35 L-BU/BK	747	Left Rear Door Ajar Switch Signal
16-17	-	-	Not Used
18	0.35 L-BU	244	Passenger Door Lock Switch Lock (without AXE)
19-20	-	-	Not Used
21	0.35 PU/WH	1382	LED Dimming Signal
22	0.35 L-GN	5926	Rear Access Open Switch Signal (TB4)
23	0.35 GY	5797	Rear Closure Handle Switch Open Signal (TB4)
24-25	-	-	Not Used

Connector Part Information

Harness Type: Body
OEM Connector: HITPB-25-F-PK
Service Connector: 88988842
Description: 25-Way F HIT Series (PK)

Terminal Part Information

Pins: 1-3
Terminated Lead: 13327199
Release Tool: J-38125-12A
Diagnostic Test Probe: J-35616-35 (VT)
Terminal/Tray: SNAC-A061T-M2.8/20
Core/Insulation Crimp: E/A

Pins: 8-10, 12, 14-16, 18, 20-23
Terminated Lead: 13575870
Release Tool: J-38125-12A
Diagnostic Test Probe: J-35616-64B (L-BU)
Terminal/Tray: SNAC3-A021T-M0.64/20
Core/Insulation Crimp: J/J