Driver Seat Lumbar Control Switch Replacement

WARNING: This page is about a different car, the 2011 GMC Acadia, 2011 Chevrolet Traverse, and 2011 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Driver Seat Lumbar Control Switch

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Driver Seat Adjuster Switch Mounting Plate Procedure Using a non-metallic flat-bladed tool, release the retainer tabs starting at the rear edge and working forward while pulling outward on the mounting plate. Disconnect the electrical connectors from the switch assemblies.
2	Driver Seat Lumbar Control Switch Assembly TIP: Use a flat-bladed tool to release the switch from the mounting plate.

Callout

Component Name

Driver Seat Adjuster Switch Mounting Plate

Procedure

Using a non-metallic flat-bladed tool, release the retainer tabs starting at the rear edge and working forward while pulling outward on the mounting plate.
Disconnect the electrical connectors from the switch assemblies.

Driver Seat Lumbar Control Switch Assembly
TIP: Use a flat-bladed tool to release the switch from the mounting plate.