LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2009 >> Traverse LS, AWD >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Diagnostic Information and Procedures >> DTC P0615 >> Circuit/System Verification

Circuit/System Verification

  1. Ignition ON, observe the following scan tool ECM parameters. The scan tool should display the status is OK.
    • Starter Relay Ckt Open Test Status
    • Starter Relay Ckt Short Volts Test Status
  2. Turn the ignition switch to the START position. Observe the scan tool ECM Starter Relay Ckt Short Gnd Test Status parameter. The engine should crank, and the scan tool should display the status is OK while the engine is cranking.
scientia non olet · About LEMON Manuals