LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2009 >> Traverse LS, AWD >> Repair and Diagnosis (Single Page) >> Steering >> Steering Wheel And Steering Column >> Diagnostic Information and Procedures >> Steering Column Tilt/Telescoping Inoperative >> Circuit/System Verification

Circuit/System Verification

  1. Ignition ON, observe the scan tool Tilt Up Switch, Tilt Down Switch, Telescope Forward Switch and Telescope Rearward Switch parameters while cycling the tilt/telescope switch between the TILT UP, TILT DOWN, TELESCOPE IN, and TELESCOPE OUT positions. The appropriate parameter should cycle between Active and Inactive.
  2. Observe the scan tool Tilt Sensor and Telescope Sensor parameters. Both reading should be between 0.2 and 4.8 volts.
  3. Command the column to tilt up and down and telescope in and out using the tilt/telescope switch. The column should move in the commanded direction.
scientia non olet · About LEMON Manuals