Wheel Alignment - Steering Wheel Angle and/or Front Toe Adjustment
- Loosen the jam nut on the outer tie rod (2).
- Rotate the inner tie rod (1) to the required toe specification setting. Refer to Wheel Alignment Specifications .
- Tighten the jam nut on the outer tie rod and tighten to 75 N.m (55 lb ft).
- Check the toe setting after tightening.
- Re-adjust the toe setting if necessary.
CAUTION:
Care must be taken that the boots are not twisted when rotating the inner tie rods, or damage to the boots may result.
CAUTION:
Refer to Fastener Caution
.