LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2009 >> TrailBlazer 4.2 S, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Rear Suspension System) >> Repair Instructions >> Stabilizer Shaft Link Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Isuzu Ascender, 2008 GMC Envoy, and 2008 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Stabilizer Shaft Links & Stabilizer Shaft
    GM744889Courtesy of GENERAL MOTORS CORP.
  1. Connect the stabilizer shaft link to the stabilizer shaft and to the frame.
    2. NOTE: Refer to Fastener Notice .
  2. Install the stabilizer shaft link retaining nuts.

    Tighten:  Tighten the stabilizer shaft nuts to 90 N.m (66 lb ft).

  3. Lower the vehicle.
scientia non olet · About LEMON Manuals