LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2009 >> RV Cutaway 6.6 6 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System & Fuel System - 6.6L LMM - Introduction >> Repair Instructions >> Fuel Level Sensor Replacement >> Removal Procedure

Removal Procedure

  1. Fig 1: Fuel Level Sensor Electrical Connector (1), Locking Tangs & Retaining Clip
    GM740113Courtesy of GENERAL MOTORS CORP.

    Remove the sending unit. Refer to Fuel Sender Assembly Replacement .
  2. Disconnect the fuel level sensor electrical connector (1).
  3. Remove the sensor retaining clip (3).
  4. Squeeze the locking tangs (2) and remove the fuel level sensor.
scientia non olet · About LEMON Manuals