LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2009 >> RV Cutaway 6.6 6 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System & Fuel System - 6.6L LMM - Introduction >> Repair Instructions >> Fuel Level Sensor Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Fuel Level Sensor Electrical Connector, Locking Tangs & Retaining Clip
    GM740113Courtesy of GENERAL MOTORS CORP.
  1. Install the fuel level sensor.
  2. Install the sensor retaining clip (3).
  3. Connect the sensor electrical connector (1).
  4. Install the sending unit. Refer to Fuel Sender Assembly Replacement .
scientia non olet · About LEMON Manuals