LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2009 >> RV Cutaway 6.6 6 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System & Fuel System - 6.6L LMM - Introduction >> Repair Instructions >> Fuel Cooler Inlet Hose Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Identifying Fuel Hose
    GM1665458Courtesy of GENERAL MOTORS CORP.
  1. Install the hose.
  2. Position the hose clamps over the clamping surface.
  3. Prime the fuel system. Refer to Fuel System Priming .
scientia non olet · About LEMON Manuals