LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2009 >> Malibu Hybrid >> Repair and Diagnosis >> External Pages >> Different car >> Section 1064 (Shift Interlock System) >> Repair Instructions >> Automatic Transmission Shift Lock Control Actuator Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2009 Buick LaCrosse and 2009 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install both ends of the automatic transaxle shift lock actuator to the pivot points.
    Fig 1: Automatic Transaxle Shift Lock Actuator Electrical Connector
    GM1218843Courtesy of GENERAL MOTORS CORP.
  2. Connect the automatic transaxle shift lock actuator electrical connector (1).
  3. Install the center console. Refer to Front Floor Console Replacement  .
  4. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (L26) or Battery Negative Cable Disconnection and Connection (LS4) .
scientia non olet · About LEMON Manuals