LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2009 >> Malibu Hybrid >> Repair and Diagnosis >> Electrical >> Body Electrical >> Hybrid Engine Control System >> Repair Instructions >> Generator Control Module Cover Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Generator Control Module Cover
    GM1891201Courtesy of GENERAL MOTORS CORP.
  1. Place the generator control module cover (1) tab into the battery tray slot.
  2. Set the cover over the ball studs and press down on the cover directly over the ball studs in order to secure the cover.
  3. Close the hood.
scientia non olet · About LEMON Manuals