Inflatable Restraint Front End Sensor Replacement

Fig 1: Identifying Inflatable Restraint Front End Sensor

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
WARNING: Refer to SIR Warning . Preliminary Procedures Disable the supplemental inflatable restraint (SIR) system. Refer to SIR Disabling and Enabling . Remove the upper air baffle and deflector. Refer to Radiator Air Upper Baffle and Deflector Replacement . Remove both headlamps. Refer to Headlamp Replacement . Remove the fascia grille support bolts, 8 total. DO NOT remove the bumper fascia. Refer to Front Bumper Fascia Energy Absorber Replacement . Remove the retainers from fascia to grille support, 4 total. Pull the grille support forward to gain clearance to the sensors.
1	Inflatable Front End Sensor Mounting Bolts (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten: 11 N.m (97 lb in)
2	Connector Position Assurance (CPA) Connector
3	Inflatable Front End Sensor