Installation Procedure

WARNING: This page is about a different car, the 2007 Chevrolet Monte Carlo and 2007 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Headlamp Flasher Components

Courtesy of GENERAL MOTORS CORP.

Position the headlamp flasher (1) to the front radiator support (2).

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the headlamp flasher bolts.
Tighten: Tighten the bolts to 10 N.m (89 lb in).
Connect the electrical connectors.
Install the upper radiator baffle. Refer to Radiator Air Upper Baffle and Deflector Replacement in Engine Cooling.