Installation Procedure

WARNING: This page is about a different car, the 2007 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Mirror And Mounting Pad

Courtesy of GENERAL MOTORS CORP.

Install the mirror to the mounting pad.
NOTE: Refer to Fastener Notice .
Tighten the screw that retains the mirror base to the mounting pad.
Tighten: Tighten the mirror set screw to 2 N.m (18 lb in).
Install the rearview mirror wiring harness.

Fig 2: View Of Wiring Harness Cover

Courtesy of GENERAL MOTORS CORP.

Install the wiring harness cover.