LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2009 >> Impala SS >> Repair and Diagnosis >> External Pages >> Different car >> Section 1331 (Disc Brake System) >> Repair Instructions >> Rear Brake Backing Plate Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2010 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Wheel Bearing/Hub Assembly Nuts
    GM1276112Courtesy of GENERAL MOTORS CORP.
  1. Remove the wheel bearing/hub. Refer to Rear Wheel Bearing and Hub Replacement .
    2. IMPORTANT: The shield is attached to the wheel knuckle through the wheel bearing hub bolts.
  2. Remove the shield from the wheel knuckle.
scientia non olet · About LEMON Manuals