LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2009 >> Impala SS >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System >> Specifications >> Fastener Tightening Specifications

Fastener Tightening Specifications

Application Specification
Metric English
Condenser-to-Radiator Bolt 6 N.m 53 lb in
Coolant Crossover Pipe Bolt (LZE/LGD) 50 N.m 37 lb ft
Coolant Heater (LS4) 50 N.m 37 lb ft
Coolant Heater (LZ4,LZE,LGD) 60 N.m 44 lb ft
Engine Coolant Air Bleed Pipe/Cover Bolt (LS4) 12 N.m 106 lb in
Lower Radiator Support Bracket Bolt 60 N.m 44 lb ft
Thermostat Bypass Pipe-to-Engine Front Cover Bolt (LZ4,LZE,LGD) 11 N.m 98 lb in
Thermostat Bypass Pipe-to-Throttle Body Nut (LZ4,LZE,LGD) 25 N.m 18 lb ft
Thermostat Housing Bolt/Stud (LZ4,LZE,LGD) 10 N.m 89 lb in
Transmission Oil Cooler Pipe Attachment Nut 7 N.m 62 lb in
Upper Radiator Support Bracket Bolt 10 N.m 89 lb in
Water Outlet Housing Bolt (LS4) 15 N.m 11 lb ft
Water Pump Bolt (LS4) 15 N.m 11 lb ft
Water Pump Bolt (LZ4,LZE,LGD) 25 N.m 18 lb ft
Water Pump Manifold Bolt (M8) (LS4) 30 N.m 22 lb ft
Water Pump Manifold Bolt (M10) (LS4) 60 N.m 44 lb ft
Water Pump Pulley Bolt (LZ4,LZE,LGD) 25 N.m 18 lb ft