LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2009 >> Impala SS >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Generator Replacement (LS4) >> Removal Procedure

Removal Procedure

    Fig 1: View Of Generator Electrical Connectors
    GM1552786Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (RPO LS4)  or Battery Negative Cable Disconnection and Connection (RPOs LZE/LZ4/LZ8) .
  2. Remove the engine sight shield. Refer to Upper Intake Manifold Sight Shield Replacement .
  3. Remove the drive belt. Refer to Drive Belt Replacement - Accessory .
  4. Disconnect the generator electrical connector (2).
  5. Position aside the protective boot (1) from the generator output BAT terminal for access.
  6. Remove the generator output BAT terminal nut (4) and remove the positive battery lead (3) from the generator.
    7. Fig 2: View Of Generator & Bolts
    GM1552788Courtesy of GENERAL MOTORS CORP.
  7. Remove the generator bolts and generator.
scientia non olet · About LEMON Manuals