LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2009 >> Impala SS >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Generator Bracket Replacement (LS4) >> Removal Procedure

Removal Procedure

    Fig 1: View Of Generator Bracket
    GM1552789Courtesy of GENERAL MOTORS CORP.
  1. Remove the generator. Refer to Generator Replacement (LS4)  or Generator Replacement (RPOs LZE/LZ4/LZ8) .
  2. Remove the idle pulley. Refer to Drive Belt Idler Pulley Replacement .
  3. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  4. Remove the lower tensioner bolt and rotate the tensioner to access the generator bracket bolt.
  5. Lower the vehicle.
  6. Remove the generator bracket bolts.
  7. Remove the generator bracket from the stud.
scientia non olet · About LEMON Manuals