Inside Rearview Mirror Replacement

Fig 1: Inside Rearview Mirror Replacement

GM2000287

Courtesy of GENERAL MOTORS CORP.

Callout

Component Name

1

Inside Rearview Mirror

CAUTION: Refer to Fastener Caution .

Procedure

Inside Rearview Mirror Cover, if equipped
Disconnect the electrical connector, if euipped.
Adjust the mirror to the full upward position.
Loosen the set screw located at the base of the mirror.
Slide the mirror upward off of the rearview mirror button.
Refer to CONTROL MODULE REFERENCES for programming and setup information, if equipped.

Tighten: Tighten the screws to 2 N.m (18 lb in)