LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2009 >> Impala Police >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 3.9L - Introduction >> Repair Instructions >> Crankshaft Position Sensor Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of CKP Sensor
    GM1587763Courtesy of GENERAL MOTORS CORP.
  1. Lubricate the CKP sensor O-ring with clean engine oil.
  2. Install the CKP sensor.
  3. Install the CKP sensor stud.

    Tighten:  Tighten the stud to 10 N.m (89 lb in).

    4. Fig 2: Identifying Electrical Connector
    GM1612884Courtesy of GENERAL MOTORS CORP.
  4. Connect the CKP sensor electrical connector (4).
  5. Lower the vehicle.
scientia non olet · About LEMON Manuals