LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2009 >> Impala LT, 3.5 K >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 3.5L - Introduction >> Repair Instructions >> Secondary Air Injection Pipe Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Identifying Air Shutoff/Check Valve Nuts
    GM1844047Courtesy of GENERAL MOTORS CORP.
  1. Remove the catalytic converter. Refer to Catalytic Converter Replacement (With LZE, NU6 and PZEV) .
  2. Remove the secondary air injection (AIR) shutoff/check valve nuts (1).
    3. Fig 2: Identifying Air Pipe Bolts
    GM1844049Courtesy of GENERAL MOTORS CORP.
  3. Remove the AIR pipe bolts (1).
  4. Remove the AIR pipe, heat shield, and gaskets. Discard the gaskets.
  5. Remove the heat shield from the AIR pipe.
scientia non olet · About LEMON Manuals