LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2009 >> Impala LT, 3.5 K >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 3.5L - Introduction >> Repair Instructions >> Accelerator Pedal Position Sensor Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Identifying Left Instrument Panel (I/P) Sound Insulator
    GM1618756Courtesy of GENERAL MOTORS CORP.
  1. Remove the left instrument panel (I/P) sound insulator. Refer to Instrument Panel Insulator Panel Replacement - Left Side .
  2. Disconnect the accelerator pedal position (APP) sensor electrical connector (1).
    3. Fig 2: View Of APP Sensor Assembly
    GM1618780Courtesy of GENERAL MOTORS CORP.
  3. Remove the APP sensor assembly bolts.
  4. Remove the APP sensor assembly from the vehicle.
scientia non olet · About LEMON Manuals