LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2009 >> HHR SS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 580 (Wiring Systems And Power Management - Component Connector End Views - Transfer Case Encoder Through Yaw Sensor) >> Component Connector End Views >> Vehicle Communications Interface Module (VCIM) X1 (UE1) Connector End View

Vehicle Communications Interface Module (VCIM) X1 (UE1) Connector End View

WARNING: This page is about a different car, the 2011 GMC Canyon and 2011 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Vehicle Communications Interface Module (VCIM) X1 (UE1) Connector End View
GM697022Courtesy of GENERAL MOTORS CORP.
Vehicle Communications Interface Module (VCIM) X1 (UE1)

Pin Wire Circuit Function
1 - - Not Used
2 0.35 BN/WH 2517 Keypad Red LED Signal
3 0.35 YE/BK 2516 Keypad Green LED Signal
4-5 - - Not Used
6 0.35 L-GN/BK 2515 Keypad Control
7 0.8 BK/WH 1151 Ground
8-10 - - Not Used
11 0.35 D-GN/WH 2514 Keypad Signal
12-15 - - Not Used
16 0.8 OG 340 Battery Positive Voltage
Connector Part Information 
  • Harness Type: Instrument Panel
  • OEM Connector: 15431362
  • Service Connector: 15306351
  • Description: 16-Way F Micro-Pack 100A Series (NA)
Terminal Part Information 
  • Terminated Lead: 13575548
  • Release Tool: J-38125-559
  • Diagnostic Test Probe: J-35616-16 (L-GN)
  • Terminal/Tray: 15445905/23
  • Core/Insulation Crimp: Pins: 2, 3, 6, 11: J/J
  • Core/Insulation Crimp: Pins: 7, 16: K/K
scientia non olet · About LEMON Manuals