Backup Lamp Bulb Replacement

WARNING: This page is about a different car, the 2010 Chevrolet HHR. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Backup Lamp Bulb

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Open the liftgate. Remove either the LH or RH rear quarter trim panel access hole cover. Disconnect the electrical connector at the backup lamp bulb socket. Turn the lamp socket a quarter turn counterclockwise and remove.
1	Backup Lamp Assembly Nuts (Qty: 3) CAUTION: Refer to Fastener Caution . Tighten: 6 N.m (53 lb in)
2	Backup Lamp Socket
3	Backup Lamp Assembly Bulb Tip: Pull the bulb straight from the bulb socket.