Child Restraint Tether Anchor Replacement
WARNING: This page is about a different car, the 2010 Chevrolet HHR. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Remove the rear floor trim plate. Refer to Rear Floor Trim Plate Replacement . |
|
| 1 | Child Seat Restraint System Bracket Bolt
CAUTION:
Refer to Fastener Caution
. Tip: Lean seat backs forward to allow easier access to fasteners. Tighten: 40 N.m (30 lb ft) |
| 2 | Child Seat Restraint System Bracket |