LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2009 >> HHR SS, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 2.0L - Introduction >> Repair Instructions >> Fuel Tank Pressure Sensor Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Fuel Tank Pressure Sensor
    GM1636702Courtesy of GENERAL MOTORS CORP.
  1. Install the fuel tank pressure sensor to the module. Ensure that the sensor grommet is fully seated in the module.
    2. Fig 2: Identifying Fuel Pressure Sensor & Fuel Pump Module Electrical Connectors
    GM1636698Courtesy of GENERAL MOTORS CORP.
  2. Connect the fuel pressure sensor electrical connector (4).
  3. Install the fuel tank. Refer to Fuel Tank Replacement .
scientia non olet · About LEMON Manuals