LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2009 >> HHR SS, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 578 (Wiring Systems And Power Management - Component Connector End Views - Heated Oxygen Sensor Through MAF Sensor) >> Component Connector End Views >> Heated Seat Control Module - Passenger (KA1) Connector End View

Heated Seat Control Module - Passenger (KA1) Connector End View

WARNING: This page is about a different car, the 2011 GMC Canyon and 2011 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Heated Seat Control Module - Passenger (KA1) Connector End View
GM813070Courtesy of GENERAL MOTORS CORP.
Heated Seat Control Module - Passenger (KA1)

Pin Wire Circuit Function
1 - - Not Used
2 BK/RD - Heated Seat Temperature Sensor Signal
3 - - Not Used
4 BK 2050 Ground
5 RD 2240 Battery Positive Voltage
6 WH 1501 Passenger Heated Seat High/Low Signal
7 YE - Heated Seat Element Supply Voltage
8 - - Not Used
Connector Part Information 
  • Harness Type: Heated Seat - Passenger
  • OEM Connector: 15-97-5081
  • Service Connector: 89046731
  • Description: 8-Way F Mini-Fit Series (BK)
Terminal Part Information 
  • Terminated Lead: Service by Connector Assembly - 89046731
  • Release Tool: Not Available
  • Diagnostic Test Probe: Not Available
  • Terminal/Tray: Not Available
  • Core/Insulation Crimp: Not Available
scientia non olet · About LEMON Manuals