LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2009 >> HHR LS, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Controls And Fuel - 2.0L - Introduction) >> Repair Instructions >> Fuel Level Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Fuel Pump Module
    GM1636703Courtesy of GENERAL MOTORS CORP.
  1. Remove the fuel pump module. Refer to Fuel Pump Module Replacement .
  2. Release the retaining tabs (2) on the reservoir body and begin to slide the level sensor out away from the reservoir.
  3. Carefully slide the level sensor the rest of the way out of the reservoir.