LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2009 >> Equinox LT, FWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 3.4L - Introduction >> Repair Instructions >> Engine Coolant Temperature Sensor Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Identifying Engine Coolant Temperature (ECT) Sensor
    GM1087791Courtesy of GENERAL MOTORS CORP.
  1. Drain the engine coolant to a level below the engine coolant temperature (ECT) sensor. Refer to Cooling System Draining and Filling (LNJ GE 47716 Fill) or Cooling System Draining and Filling (LNJ Static Fill) .
  2. Remove the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement .
  3. Disconnect the ECT sensor harness connector.
  4. Remove the ECT sensor.
scientia non olet · About LEMON Manuals