LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2009 >> Cutaway 6.6 6 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System & Fuel System - 6.6L LMM - Introduction >> Repair Instructions >> Manifold Absolute Pressure Sensor Replacement >> Removal Procedure

Removal Procedure

    Fig 1: View Of engine harness electrical connector
    GM1731205Courtesy of GENERAL MOTORS CORP.
  1. Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement .
  2. Disconnect the manifold absolute pressure (MAP) sensor electrical connector.
  3. Fig 2: Identifying MAP Sensor And Bracket
    GM1731224Courtesy of GENERAL MOTORS CORP.

    Remove the MAP sensor bolt.
  4. Remove the MAP sensor bracket and sensor.
scientia non olet · About LEMON Manuals