Generator Replacement (LS9)

Fig 1: Identifying Generator

Courtesy of GENERAL MOTORS CORP.

Culotte	Component Name
Preliminary Procedures Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (LS7 or LS9) or Battery Negative Cable Disconnection and Connection (LS3) . Remove the drive belt. Refer to Drive Belt Replacement - Accessory (w/o LS9) or Drive Belt Replacement - Accessory (LS9) .
1	Nut CAUTION: Refer to Fastener Caution . Tighten: 13 N.m (115 lb in)
2	Bolt (Qty: 2) Tighten: 50 N.m (37 lb ft)
3	Bolt (Qty: 2) Tighten: 50 N.m (37 lb ft) Tip: Align the generator harness bracket with the rear bolt hole on the generator prior to bolt installation.
4	Generator Procedure: Disconnect the generator field harness connector.