LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2008 >> Uplander LT, 3.9 1 >> Repair and Diagnosis >> Brakes >> Anti-Lock Brake System, Traction Control System & Stability Control System >> Repair Instructions >> Rear Wheel Speed Sensor Replacement >> Installation Procedure

Installation Procedure

  1. Install the hub and bearing assembly to the vehicle. Refer to Rear Wheel Bearing and Hub Replacement (Without Independent Suspension) .
  2. Turn the ignition switch to the ON position, with the engine OFF.
  3. Perform the diagnostic system check. Refer to Diagnostic System Check - Vehicle .
scientia non olet · About LEMON Manuals