Electronic Traction Control Switch Replacement

Fig 1: Identifying Instrument Panel Accessory Trim Plate, Driver Information Display Switch

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Instrument Panel (I/P) Accessory Trim Panel
2	I/P Accessory Trim Panel Clip (Qty: 5)
3	I/P A/C Center Outlet Assembly Tip: Pull rearward of the I/P to remove. Disconnect electrical connectors from the switches.
4	Driver Information Center Display Switch Screw NOTE: Refer to Fastener Notice . Tighten: 2 N.m (18 lb in)
5	Traction Control Switch Assembly