LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2008 >> Uplander LT, 3.9 1 >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Immobilizer System >> Repair Instructions >> LED Indicator Replacement - Vehicle Security System >> Installation Procedure

Installation Procedure

    Fig 1: View Of Security Indicator Lamp
    GM315292Courtesy of GENERAL MOTORS CORP.
  1. Connect the security indicator lamp electrical connector to the security indicator lamp.
  2. Install the security indicator lamp to the instrument panel upper trim:
    1. Insert the lamp.
    2. Rotate the lamp clockwise to approximately 1/4 turn.
  3. Install the instrument panel upper trim.
scientia non olet · About LEMON Manuals