LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2008 >> Tahoe Hybrid, RWD >> Repair and Diagnosis >> Hybrid/Electric Powertrain >> Electric Converters and Controllers >> Hybrid Engine Control System >> Diagnostic Information and Procedures >> DTC P16F5 >> Circuit/System Testing

Circuit/System Testing

  1. Ignition OFF, disconnect the 12V battery. Refer to Battery Negative Cable Disconnection and Connection .
  2. Wait 2 minutes.
  3. Reconnect the 12V battery. Refer to Battery Negative Cable Disconnection and Connection .
  4. Ignition ON, retest for DTC P16F5.
    • If the DTC resets, program the PIM with the latest software version and recheck for DTCs. If the DTC resets after programming or if the PIM already contains the latest software version, replace the PIM.
scientia non olet · About LEMON Manuals