LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2008 >> Tahoe Hybrid, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 116 (HVAC System - Manual) >> Repair Instructions >> HVAC Control Module Replacement

HVAC Control Module Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2009 GMC Yukon XL, 2009 GMC Yukon, 2009 Chevrolet Tahoe, 2009 Chevrolet Suburban, and 2009 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of HVAC Control Assembly & Screws
GM1682696Courtesy of GENERAL MOTORS CORP.
Callout Component Name

Preliminary Procedure

  1. Remove the instrument panel accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement (Cadillac) or Instrument Panel Accessory Trim Plate Replacement (Except Cadillac) .
  2. Remove the accessory switch assembly. Refer to Accessory Switch Replacement (Except Cadillac) or Accessory Switch Replacement (Cadillac) .
  3. Disconnect the electrical connectors.
1 Heater and Air Conditioning Control Assembly Screw (Qty: 2)
CAUTION: Refer to Fastener Caution .

Tighten:  1.5 N.m (13 lb in)

2 Heater and Air Conditioning Control Assembly
Tip:  HVAC Control Module must be reprogrammed. Refer to Control Module References .