LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2008 >> Tahoe Hybrid, RWD >> Repair and Diagnosis >> Electrical >> Charging Systems >> Hybrid Engine Electrical System >> Repair Instructions >> Generator Control Module Ground Strap Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Drive Motor Generator Control Module Ground Strap & Bolt
    GM1968778Courtesy of GENERAL MOTORS CORP.
  1. Position the ground strap (2) to the drive motor generator control module.
    2. NOTE: Refer to Fastener Notice .
  2. Install the ground strap bolt (1).

    Tighten:  Tighten the bolt to 9 N.m (80 lb in).

  3. Install the air cleaner assembly. Refer to Upper Intake Manifold Cover Replacement .
scientia non olet · About LEMON Manuals